Author: users

Conference / Workshop/Publication

ESWeek 2023

by users

At Embedded Systems Week (ESWEEK 2023) held in Hamburg, Germany, from September 17 to 22, 2023, Ikeda presented his research (presentation date: September 20). The published results related to this presentation are available as the following paper.

  • Sosei Ikeda, Hiromitsu Awano, and Takashi Sato, “Modular DFR: Digital delayed feedback reservoir model for enhancing design flexibility,” ACM Transactions on Embedded Computing Systems (TECS), Vol.22, No.5s, pp.110:1-110:20, September 2023. doi: 10.1145/3609105
Conference / Workshop

ASP-DAC 2024 採録決定

by users

OBの陳国威君の論文が、Asia and South Pacific Design Automation Conference (ASP-DAC 2024)に採択されました。

Alumni CHEN-Kun’s papers is accepted to Asia and South Pacific Design Automation Conference 2024 !

Guowei Chen, Akiyoshi Tanaka, and Kiichi Niitsu, “A 0.37 V 126 nW 0.29 mm2 65-nm CMOS Biofuel-Cell-Modulated Biosensing System Featuring an FSK-PIM-Combined 2.4 GHz Transmitter for Continuous Glucose Monitoring Contact Lenses”

Conference / Workshop

Paper accepted: ASP-DAC 2024

by users

The following papers have been accepted for Asia and South Pacific Design Automation Conference (ASP-DAC) to be held in Incheon, Korea, in January 2024.

  • K. Suemitsu, K. Matsuoka, T. Sato, and M. Hashimoto, “Logic Locking Over TFHE for Securing User Data and Algorithms,” Proceedings of Asia and South Pacific Design Automation Conference (ASP-DAC), 2024, to appear.
  • K. Oshima, K. Kuribara, and T. Sato, “Design of aging-robust clonable PUF using organic thin-film transistors and insulator-based ReRAM,” in Proc. ACM/IEEE Asia and South Pacific Design Automation Conference (ASPDAC), 2024, to appear.
  • K. Matsuoka, S. Bian, and T. Sato, “HOGE: Homomorphic gates on a chip,” in Proc. ACM/IEEE Asia and South Pacific Design Automation Conference (ASPDAC) 2024, to appear.
Conference / Workshop

SSDM 2023

by users

Two research presentations were given at SSDM2023 (International Conference on Solid State Devices and Materials 2023) held at Nagoya Congress Center on September 5-8, 2023.

  • Kazunori Kuribara, Atsushi Takei, Takashi Sato, and Manabu Yoshida, “Low voltage operation of organic thin-film transistor with atmospheric coating of high-k polymer dielectric,” in Proc. International Conference on Solid State Devices and Materials (SSDM), pp.195-196, September 2023.
  • Hiroki Urabe, Kunihiro Oshima, and Takashi Sato, “Feasibility study of PLL-based analog-to-digital converter for low-voltage organic thin-film transistors,” in Proc. International Conference on Solid State Devices and Materials (SSDM), pp.795-796, September 2023.
Conference / Workshop

IEEE BIOCAS 2023 採録決定

by users

OBの田中君の論文が、2023 IEEE Biomedical Circuits and Systems Conferenceに採択されました。

Alumni Tanaka-Kun’s papers is accepted to 2023 IEEE Biomedical Circuits and Systems Conference !

Akiyoshi Tanaka, Guowei Chen, Kiichi Niitsu, “A 0.063-mm^2 1.75-nW Biofuel Cell-Input Biosensing/Data-Storing System with 5.5-GHz Wireless Backscatter Data-Readout in 65-nm CMOS for Self-Powered Smart Contact Lenses”

Publication

IEEE Transactions on Circuits and Systems I: Paper accepted

by users

The paper below has been accepted for publication in IEEE Transactions on Circuits and Systems I: Regular Papers.

Q. Cheng, M. Huang, C. Man, A. Shen, L. Dai, H. Yu, and M. Hashimoto, “Reliability Exploration of System-On-Chip with Multi-Bit-Width Accelerator for Multi-Precision Deep Neural Networks,” IEEE Transactions on Circuits and Systems I: Regular Papers, in early access, DOI: 10.1109/TCSI.2023.3300899.

Conference / Workshop

DAC2023

by users

At the Design Automation Conference (DAC) held July 9-13, 2023 in San Francisco, California, USA, Ikeda (M2) gave a poster presentation in the WIP session.

S. Ikeda, H. Awano, and T. Sato, “No-NL DFR: New model of digital delayed feedback reservoir without nonlinear elements”

Conference / Workshop

SSDM 2023: Paper accepted

by users

The following paper has been accepted for presentation at the International Conference on Solid State Devices and Materials (SSDM) 2022. This work is the result of joint research with National Institute of Advanced Industrial Science and Technology (AIST).

  • H. Urabe, K. Oshima, and T. Sato, “Feasibility study of PLL-based analog-to-digital converter for low-voltage organic thin-film transistors,” in Proc. International Conference on Solid State Devices and Materials (SSDM), September 2023. (to appear)
  • K. Kuribara, A. Takei, T. Sato, and M. Yoshida, “Low voltage operation of organic thin-film transistor with atmospheric coating of high-k polymer dielectric,” in Proc. International Conference on Solid State Devices and Materials (SSDM), September 2023. (to appear)
Conference / Workshop/Publication

Paper accepted: ACM TECS

by users

The following paper has been accepted for publication in ACM Transactions on Embedded Computing Systems (TECS). This research will be presented orally at the International Conference on Compilers, Architectures, and Synthesis for Embedded Systems (CASES), one of the international conferences comprising Embedded System Week (ESWeek), to be held in Hamburg, Germany, in September 2023.

Sosei Ikeda, Hiromitsu Awano, and Takashi Sato, “Modular DFR: Digital delayed feedback reservoir model for enhancing design flexibility,” ACM Transactions on Embedded Computing Systems (TECS), accepted for publication.